NEWS UPDATES
Welcome to NOOR ALAM's Online Technical solution we're provides Mechanical Electrical Instruments Civil online Services ,and many many more:

Saturday, December 17, 2016

Industrial agitators

Industrial agitators are machines used in industries that process products in the chemical, food, pharmaceutical and cosmetic industries, in a view of :
  • mixing liquids together
  • promote the reactions of chemical substances
  • keeping homogeneous liquid bulk during storage
  • increase heat transfer (heating or cooling)
They are devices used to stir or mix fluids, liquids specifically.

Types

Mainly 4 types of Agitators are used in Pharmaceutical reactors, they are
1.Anchor
2.Turbine
3.Propeller
4.Gas induction

Several different kind of industrial agitators exist:
  • mechanical agitators (rotating)
  • static agitators ( pipe fitted with baffles)
  • Rotating tank agitators (like concrete mixer)
  • Agitator Mixer Padole Type
  • Agitators working with a pump blasting liquid
  • Agitator turning thanks to gas
The choice of the agitator depends on the phase that needs to be mixed (one or several phases): Liquids only, liquid and solid, liquid and gas or liquid with solids and gas. Depending on the type of phase and viscosity of the bulk, the agitator can be named mixer, kneader, dough mixer, amongst others. The agitators use in liquids can be placed on the top of the tank on vertical position, or horizontally (on the side of the tank) or less common, agitator is located on the bottom of the tank.

Principle of agitation

The agitation is achieved by movement of the heterogeneous mass(liquid-solid phase),to the impeller. This is due to mechanical agitators, to the rotation of an impeller. The bulk can be composed of different substances and the aim of the operation is to blend it or to improve the efficiency of a reaction by a better contact between reactive product. Or the bulk is already blended and the aim of agitation is to increase a heat transfer or to maintain particles in suspension to avoid any deposit.

Data of an agitator

The agitation of liquid is made by one or several agitation impellers. Depending on its shape, the impeller can generate:
  • the moving of the liquid which is characterized by its velocity and direction.
  • Turbulence which is an erratic variation in space and time of local fluid velocity.
  • Shearing given by a velocity gradient between two filets of fluids.

These two phenomena provide energy consumption.

Impellers

Propellers (marine or hydrofoil) give an inlet and outlet which are on axial direction, preferably downward, they are characterized by a nice pumping flow, low energy consumption and low shear magnitude as well as low turbulence.
Turbines (flat blades or pitched blades) which inlet flow is axial and outlet flow is radial will provide shearing, turbulence and need approximately 20 time more energy than propellers, for the same diameter and same rotation speed.

Mechanical features

An agitator is composed of a drive device ( motor, gear reducer, belts…), a guiding system of the shaft (lantern fitted with bearings), a shaft and impellers .
If the operating conditions are under high pressure or high temperature, the agitator must be equipped with a sealing system to keep tightened the inside of the tank when the shaft is crossing it.
If the shaft is long (> 10m), it can be guided by a bearing located in the bottom of the tank (bottom bearing).

0 comments:

Post a Comment